Apollo 15-Point Master Tune-Up Plans

A vital component of Apollo Care Plans is the 15-point master tune-ups that are included no matter what Care Plan you choose.  After our technician performs the master tune-ups, your heating, cooling and plumbing systems will run at peak efficiency!

15-Point Master Heating Tune-up

1. Test and adjust safety and operating controls
2. Test gas valve or oil pump operation
3. Inspect for combustion leaks
4. Test and tighten all wiring and connections
5. Conduct carbon monoxide testing
6. Adjust and clean thermostat
7. Inspect heat exchanger and clean burner(s)
8. Adjust burner(s) for maximum efficiency
9. Inspect flue pipe and draft diverter or barometric damper
10. Adjust and clean electrode or pilot assembly
11. Check blower motor (and belt if applicable)
12. Drain expansion tank or install customer-supplied air filter
13. Replace oil filter and nozzle or test and adjust pressure regulator
14. Lubricate all motors, bearings, fans and circulators
15. Inform customer of equipment condition and provide printed report

15-Point Master Cooling Tune-up

1. Lubricate all moving parts
2. Safety test all controls for proper operation
3. Install gauges; record operating pressures and temperatures
4. Inspect start and run capacitors and relays for bulges, rusts and leaks
5. Measure refrigerant superheat to fine-tune its charge
6. Flush condensate drain to protect against overflow
7. Tighten and safety test all wiring and connections
8. Check blower motor (and belt if applicable)
9. Test “temperature drop” at return and supply air; adjust blower
10. Adjust and clean thermostat
11. Meter voltage and amperage in all motors; test for worn bearings
12. Test condition of compressor contacts
13. Check air filter; clean or replace with customer-supplied filter
14. Clean outdoor condenser coil
15. Inform customer of equipment condition and provide printed report

For years, customers appreciative of our professional and courteous service have been asking us if we also  provide plumbing services — and now we do! This is another way for Apollo to guarantee total home comfort… with just one call.

15-Point Master Plumbing Tune-Up

1. Locate, label and check main water shut off valve
2. Check water pressure
3. Check expansion tank
4. Check washer hose connections
5. Check sump pump (if applicable)
6. Visual inspection of all exposed plumbing
7. Water hardness test
8. Check for slow drains
9. Check shower heads
10. Dye test water closet
11. Check shut off valves
12. Check of shower/tub caulking
13. Check outside faucets
14. Check disposal for wear
15. Written report of all recommendations